Fluence SPYDR 2h 47" LED Grow Light System

Increase in PPF Increase efficiency by 28% and maximizes space with greater light intensity.

The SPYDR 2h is a high-output grow light for commercial cultivation environments, producing a photosynthetic photon flux (PPF) of 2,180 µmol/s. With strong uniformity and our PhysioSpec broad R4 spectrum, SPYDR 2h is designed to maximize yields for growers by incorporating high-intensity lighting and cultivation strategies.

Detachable Power Supply

The SPYDR 2 Series features a detachable Power Supply that can be mounted remotely on the side of a rack or on an adjacent wall to remove heat from your grow space. With the power supply remote mounted, the remaining SPYDR 2 fixture is only 1.3” (33 mm) thin (4.6” (117 mm) with power supply attached).

Push-lock Connectors

For quick and easy installation, all SPYDR 2 Series fixtures and associated cables have been updated with Push-Lock connectors. Power and dimming cables now snap together with a light push while still retaining their IP66 wet-location rating.

Easy Mounting Options

With the ability to maximize use of your growing space, SPYDR 2  has various hardware options for easy mounting to all types of racks and tables with no drilling or other modifications to the rack system.

Recommended mounting height of 6”–12″ (152 x 305 mm) above plant canopy.

All SPYDR models are dimmable with our light intensity Dimmer for precise control over PPFD and offer flexibility to instantly accommodate a new crop with varying light requirements.

PhysioSpec Indoor is a full-cycle spectrum optimized for rapid growth and complete plant development. Tailored for growing plants from initiation to senescence (germination, clones/cuttings, mothers, vegetative and flowering applications) in indoor environments.  With a CRI rating of 85, PhysioSpec Indoor offers a beautiful work and research environment with vivid colors and greater contrast to study the health of your crop.

Mounting Hardware Options:

• Lance Hangers: Provides a 2-point hanging solution, but the customer must supply their own rope ratchets, chain or cable. PSE must also be centered on the fixture or it will be off balance. This is the standard option when not using multi-tier racks.
• Adjustable Hanging Kit: Provides a 2-point hanging solution with 5 feet of braided stainless steel wires and carabiners. PSE must also be centered on the fixture or it will be off balance.
• Short "V" Mounting Brackets: Provides a 4-point mounting solution that's ideal for waterfall decking on top of 2"-3.5" support beams (rolling racks and some pallet racks).
• Long "V" Mounting Brackets: Provides a 4-point mounting solution that's ideal for waterfall decking on top of 4"-5" support beams (pallet racks).
• Solid Decking Mounting Brackets: Provides a 4-point mounting solutions that's ideal for level solid decking and rolling tables. Requires two front-to-back support bars per fixture.

Plug Type Options:

• NEMA 5-15P: This is the standard plug type for most residential (110/120V) outlets in the U.S.
• NEMA 6-15P: This is the standard plug type for most commercial (220/240V) outlets in the U.S.
• NEMA L7-15P: This is a twist-lock plug that is usually meant for outlets with voltages that are 220V or higher.
• Pigtails: If you choose this option there will be no plug at the end of the power cord, only bare wires. This option is normally chosen if the fixture will be hard-wired to your power source.

DC Cord Upgrade Options: The power supply is normally attached directly to the SPYDR fixture. Choose a DC Cord Upgrade only if you wish to remotely mount the power supply. You can mount the power supply on the side of a rack or on an adjacent wall to remove heat from your grow space, and to allow an extra 3.3" of canopy height. A pair of PSE Mounts is included with every fixture, which are ideal for pipes but wide enough for Unistrut as well.

• Amps @230V: 3.63A
• Amps @277V: 2.87A
• Amps @347V: 2.34A
• Amps @480V: 1.70A