Fluence Dimmer w/Power Supply

If you need help figuring out what parts to purchase, or you need help wiring multiple fixtures please contact us - we're Fluence experts and we're here to help!

Download FLEX Cable and standard wiring diagrams here -> Complete Fluence Dimming & FLEX Cable Guide w/Diagrams

Fluence Bioengineering offers a reliable, user-friendly dimmer that controls light intensity from 0-100% for up to 50 Fluence fixtures. Controlling PPFD while reducing energy consumption, and maintaining a high coefficient of utilization (CU) by increasing light-use efficiency, is now easier than ever.

This dimmer allows growers to easily control the light intensity of their Fluence fixture via an easy-to-use up/down arrow function, and clearly shows the user their light output via a digital display.

The dimmer connects to each Fluence fixture via a threaded or push-lock connector (provided) through an adjustable PWM or 0-10V signal switch, and can be daisy-chained to connect up to 50 fixtures (not to exceed 200 feet of signal wire) off a single dimmer.

Extending the signal wire more than 200 feet will weaken the signal strength and may reduce the total number of fixtures that can be dimmed. If more than 200 feet of total signal wire is needed, please consult an electrician or contact a Fluence representative at [email protected].

A battery-backup ensures light levels are maintained in the event of a brief power outage to the dimmer.

This dimmer should be installed away from wet environments and areas likely to be splashed with water, and always dry hands thoroughly before using. Do not install this dimmer in environments with 80%+ humidity.

Please note: This dimmer is meant to control the overall light intensity of your Fluence Bioengineering fixture(s). It is not meant to act as a timer to control photoperiod. Please use a switch or timer to power fixtures on/off for photoperiod control.

Box includes: Dimmer, (2) Signal Wire Connectors and a 120 VAC power adapter.

Ordering Instructions

Single Light Fixture Installation:
To control a single fixture you have two options.

1. Purchase a Fluence Dimming Signal Cable - 3 pin (Fluence #71388). One side of this cable connects to the Signal Wire Connector on the Dimmer (included), the other connects to the dimming port on the light fixture power supply.
2. Use 18 AWG, 2 conductor wire (available at most hardware stores) and connectors (wire nuts, Scotchlok - any appropriate wire splice connectors will work) to go from the Signal Wire Connector on the Dimmer (included) to the Dimming Cable Adapter (included with every Fluence light fixture).

Multiple Light Fixture Installation:
To control multiple fixtures you have two options.

1. Purchase a Fluence Dimming Signal Cable - 4 pin (Fluence #71388 or 71366). One side of this cable connects to the Signal Wire Connector on the Dimmer (included), the other connects to a Fluence FLEX T-Connector (Fluence #71369A, 71368 or 71386). You will need to purchase (1) FLEX T-Connector for each fixture and use (1) Dust Cap (Fluence #71375A) at the end of each series/row of lights (refer to diagram).
2. Use 18 AWG, 2 conductor wire (available at most hardware stores) and connectors (wire nuts, Scotchlok - any appropriate wire splice connectors will work) to go from the Signal Wire Connector on the Dimmer (included) to the Dimming Cable Adapter (included with every Fluence light fixture) on each light fixture.

If you need any help figuring out how to wire multiple fixtures please contact us - we're Fluence experts and are here to help!

Electrical Specs:

• PWM Dimming Signal: 0-100% +/- 1% Source/Sink: 40mA DC
• 0-10V Dimming Voltage: 0-10V +/- .1V Source/Sink: 40mA DC
• Backup Battery LiPo: 600mA (Fully Charged)
• USB Charger Input: 120V AC Power Output: 5V at 300mA

Return Policy:
Fluence lighting products are non-returnable. From Fluence - "Since all lighting systems depreciate with use (including the sun), we do not accept returns or exchanges on any lighting products. We do, however, offer a warranty guaranteeing our products for three years."